Pneumatic valve springs

Pneumatic valve springs

Pneumatic valve springs are metal bellows filled with compressed airCitation
last = Scarborough
first = Craig
author-link =
last2 =
first2 =
author2-link =
title = F1 Engines _ Valve technology
date =
year =
url = http://scarbsf1.com/valves.html
accessdate = 2007-03-05
] occupying roughly the same space of metal springs used to close valves in high-speed internal combustion engines. This system was introduced in the mid-1980s in Renault turbocharged 1.5 litre Formula 1 engines.

Reducing the number of moving parts that can fail is good engineering. Racing engines often failed at high speeds because mechanical springs were unable to close valves fast enough, leading to engine failure when pistons struck partially opened valves. Renault's innovation was to replace steel springs with light weight compressed air bellows that could respond more quickly and reduce the possibility of valve crashes, other than from leaking bellows. Additionally, the amount of seat tension required to keep a coil sprung valve under control results in peak lift loading drastically higher, with added stress to the entire valvetrain as a result. Pneumatic systems, sharing a common reservoir of pressure retain a more static level of force, controlling the valve effectively, without any attendant peak lift load increase. To avoid bellows failures, air springs are replaced often.

Pneumatic valve springs gave Renault an advantage with its turbocharged engines, often said to be the most powerful. However, reliability and poor handling of their chassis kept the cars from success until 1989 when Renault provided Williams with its V10 engine to begin a winning streak. Renault won the constructors' championship with Williams in 1992, 1993, 1994, 1996 and 1997, and with Benetton in 1995. Nigel Mansell, Alain Prost, Michael Schumacher, Damon Hill and Jacques Villeneuve each won a Driver's championship in the 1990s with Renault engines.

While pneumatic valve springs have become standard in Formula 1 engines, Renault has been researching computer controlled electro hydraulic valves using no camshaft, to reduce moving parts while improving valve control.

Pneumatic valve springs are also found in several Moto GP motorcycle engines, debuting in 2002 with the Aprilia RS3 Cube. In 2005, Team Roberts was the first to use pneumatic valves full time in their uncompetitive KTM powered bike. Today, almost all of the MotoGP teams use pneumatic valve technology on their bikes, including Yamaha, Kawasaki, and Suzuki. Honda only has one bike out of four that use pneumatic valves. Ducati uses a desmodromic design.

Notes

ee also

*4-stroke cycle engine valves


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Valve float — is an adverse condition which occurs when the poppet valves on an internal combustion engine valvetrain do not remain in contact with the camshaft lobe during the valve closure phase of the cam lobe profile. This reduces engine efficiency and… …   Wikipedia

  • Valve — This article is about the flow control device. For the game developer, see Valve Corporation. For the electronic component, see Vacuum tube. For other uses, see Valve (disambiguation). These water valves are operated by handles. A valve is a… …   Wikipedia

  • Overhead valve — OHV redirects here. OHV may also refer to Off highway vehicle. Components of a pushrod valve actuation system …   Wikipedia

  • Desmodromic valve — In general mechanical terms, the word desmodromic is used to refer to mechanisms that have different controls for their actuation in different directions. Desmodromic poppet valve in Ducati engine. A desmodromic valve is a reciprocating engine… …   Wikipedia

  • Variable valve actuation — Variable Valve Actuation, or VVA, is a generalised term used to describe any mechanism or method that can alter the shape or timing of a valve lift event within an internal combustion engine. There are many ways in which this can be achieved,… …   Wikipedia

  • Schrader valve — The Schrader valve, invented by August Schrader in the 1890s, consists of a valve stem into which a valve core is threaded, and is used on virtually all automobile tires and wider rimmed bicycle tires. The valve core is a poppet valve assisted by …   Wikipedia

  • Relay valve — A relay valve is an air operated valve. It is most commonly used in air brake systems to control the brakes at the rear of a trailer in a tractor trailer truck.It would take too long for sufficient air to travel from the brake pedal valve to the… …   Wikipedia

  • Formula One engines — Since its inception in 1947, Formula One has used a variety of engine regulations. The origin of the name Formula comes from the use of a maximum engine capacity and single weight regulation. Formulas limiting engine capacity had been used in… …   Wikipedia

  • Honda RC212V — Infobox Motorcycle name = Honda RC212V aka = manufacturer = Honda Racing Corporation production = 2006 present predecessor = Honda RC211V successor = parent company = class = platform = engine = convert|800|cc|cuin|0|abbr=on four stroke V4… …   Wikipedia

  • Carburetor — Bendix Technico (Stromberg) 1 barrel downdraft carburetor model BXUV 3, with nomenclature A carburetor (American spelling), carburettor, or carburetter (Commonwealth spelling) is a device that blends air and fuel for an internal combustion engine …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”