Ekman layer

Ekman layer

In standard boundary-layer theory, the effects of viscous diffusion are usually balanced by convective inertia. When a fluid rotates, however, the dominant balance may instead be struck between diffusion effects and the Coriolis force. Under these circumstances we are dealing with an Ekman layer, named after Vagn Walfrid Ekman.

In addition to enforcing the zero velocity condition at the wall, these Ekman layers can also control long-range properties of the flow. A classical illustration is given by the everyday experience of how a cup of tea returns to rest after stirring. We might model this from the decay of the rigid body motion through dissipative effects, which reach out from the stationary sides of the cup over a diffusion timescale

: t sim frac{L^2}{ u} ,

where L is the cup radius, and u the kinematic viscosity. However, the spin-down times in real cups are much shorter than this, and to calculate the correct rate of decay we must consider the Ekman layer which has formed at the bottom of the cup, with thickness

:deltasim Ek^{1/2}

(where Ek is the Ekman number).

Within the rotating core of the fluid, the radial pressure gradient balances the centrifugal forces, yet in the Ekman layer at the bottom of the cup fluid moves more slowly (due to the no-slip condition) leading to lower centrifugal forces. As pressure is constant through the boundary layer, an excess pressure gradient drives an inwards boundary-layer flow (this produces the spiral patterns often observed in tea-leaves) and fluid is ultimately ejected from the boundary layer into the core region. This causes columns of rotating fluid in the inviscid core flow to shorten and widen, and hence rotate at a slower rate in order to conserve angular momentum. It is through this mechanism by which a cup of stirred tea returns to rest.

A complete description for the flow requires us to take account of the Stewartson boundary layers, of thickness

:deltasim Ek^{1/4},

located along the side walls of the cup which act as a conduit for fluid to return to the Ekman layer at the cup bottom and hence complete the circuit. In fact, embedded within this layer lies a thinner transition region, of thickness

:Ek^{1/3},where vertical flow velocities are reduced to zero. In a highly non-linear regime where the change of rotation rate is substantial, resulting in a non-negligible Rossby number, the Stewartson layers can become detached from the side walls and propagate into the core flow.

References

*Greenspan, H.P. (1968), "The Theory of Rotating Fluids", Cambridge University Press ISBN 0-521-05147-9
*Benton, E.R., Clark, A. (1974), "Spin-Up", Annual Review of Fluid Mechanics, vol 6, pp. 257-280
*Stewartson, K. (1957), "On almost rigid rotations", Journal of Fluid Mechanics, vol. 3, pp. 17-26

See also

* Secondary flow
* Ekman spiral


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Ekman layer — The layer of transition between the surface boundary layer, where shearing stress is constant, and the free atmosphere, where the atmosphere is treated as an ideal fluid in approximate geostrophic equilibrium. Also called a spiral layer …   Aviation dictionary

  • Ekman layer — the thin horizontal layer of water riding on top of the ocean that is affected by wind …   Dictionary of ichthyology

  • Ekman — can refer to *Carl Gustaf Ekman, (1872 – 1945) a Swedish politician *Erik Leonard Ekman, (1883 1931) a Swedish botanist *Gösta Ekman (junior), (1939 ) a Swedish actor *Gösta Ekman (senior), (1890 1938) a Swedish actor *Hasse Ekman, (1915 – 2004)… …   Wikipedia

  • Ekman-Transport — Der Ekman Transport ist die über eine turbulente Grenzschicht der Atmosphäre und des Ozeans auf der rotierenden Erde vertikal integrierte Strömung. Er ist benannt nach dem schwedischen Ozeanographen Vagn Walfrid Ekman, der die erste realistische… …   Deutsch Wikipedia

  • Ekman spiral — The Ekman spiral refers to a structure of currents or winds near a horizontal boundary in which the flow direction rotates as one moves away from the boundary. It derives its name from the Swedish oceanographer Vagn Ekman. The deflection of… …   Wikipedia

  • Ekman, V Walfrid — ▪ Swedish scientist born May 3, 1874, Stockholm died March 9, 1954, Gostad, near Stockaryd, Swed.  Swedish physical oceanographer best known for his studies of the dynamics of ocean currents. The common oceanographic terms Ekman layer, denoting… …   Universalium

  • Ekman number — The Ekman number, named for V. Walfrid Ekman, is a dimensionless number used in describing geophysical phenomena in the oceans and atmosphere. It characterises the ratio of viscous forces in a fluid to the fictitious forces arising from planetary …   Wikipedia

  • Ekman transport — Ekman transport, named for Vagn Walfrid Ekman, is the natural process by which wind causes movement of water near the ocean surface. Each layer of water in the ocean drags with it the layer beneath. Thus the movement of each layer of water is… …   Wikipedia

  • Ekman , Vagn Walfrid — (1874–1954) Swedish oceanographer Ekman, the son of an oceanographer, was born in the Swedish capital of Stockholm and educated at the University of Uppsala, graduating in 1902. He worked at the International Laboratory for Oceanographic Research …   Scientists

  • Planetary boundary layer — Depiction of where the planetary boundary layer lies on a sunny day The planetary boundary layer (PBL), also known as the atmospheric boundary layer (ABL), is the lowest part of the atmosphere and its behavior is directly influenced by its… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”