Synthetic molecular motors

Synthetic molecular motors

Synthetic molecular motors are molecular machines capable of rotation under energy input. Although the term "molecular motor" has traditionally referred to a naturally occurring protein that induces motion, some groups also use the term when referring to non-biological, non-peptide synthetic motors. Many chemists are pursuing the synthesis of such molecular motors ["Synthetic Molecular Motors" Jordan R. Quinn [http://www.scs.uiuc.edu/chem/gradprogram/chem435/spring03/Quinn.pdf Online Article] ] . The prospect of synthetic molecular motors was first raised by the nanotechnology pioneer Richard Feynman in 1959 in his classic talk "There's Plenty of Room at the Bottom".

The basic requirements for a synthetic motor are repetitive 360° motion, the consumption of energy and unidirectional rotation. Two efforts in this direction were published in 1999 in the same issue of Nature. For the two reports below, it is unknown whether these molecules are capable of generating torque. It is expected that reports of more efforts in this field will increase, as understanding of chemistry and physics at the nanolevel improves.

Chemically driven rotary molecular motors

, and is capable of performing a unidirectional 120° rotation.

This rotation takes place in five steps. First, the amine group present on the triptycene moiety is converted to an isocyanate group by condensation with a phosgene molecule (a). Thermal or spontaneous rotation around the central bond then brings the isocyanate group in proximity of the hydroxyl group located on the helicene moiety (b), thereby allowing these two groups to react with each other (c). This reaction irreversibly traps the system as a strained cyclic urethane that is higher in energy and thus energetically closer to the rotational energy barrier than the original state. Further rotation of the triptycene moiety therefore requires only a relatively small amount of thermal activation in order to overcome this barrier, thereby releasing the strain (d). Finally, cleavage of the urethane group restores the amine and alcohol functionalities of the molecule (e).

The result of this sequence of events is a unidirectional 120° rotation of the triptycene moiety with respect to the helicene moiety. Additional forward or backward rotation of the triptycene rotor is inhibited by the helicene moiety, which serves a function similar to that of the pawl of a ratchet. The unidirectionality of the system is a result from both the asymmetric skew of the helicene moiety as well as the strain of the cyclic urethane which is formed in c. This strain can be only be lowered by the clockwise rotation of the triptycene rotor in d, as both counterclockwise rotation as well as the inverse process of d are energetically unfavorable. In this respect, the preference for the rotation direction is determined by both the positions of the functional groups and the shape of the helicene, and is thus built into the design of the molecule instead of dictated by external factors.

The motor by Kelly and co-workers is an elegant example of how chemical energy can be used to induce controlled, unidirectional rotational motion, a process which resembles the consumption of ATP in organisms in order to fuel numerous processes. However, it does suffer from a serious drawback: the sequence of events that leads to 120° rotation is not repeatable. Kelly and co-workers have therefore searched for ways to extend the system so that this sequence can be carried out repeatedly. Unfortunately, their attempts to accomplish this objective have not been successful and currently the project has been abandoned ["Progress toward a Rationally Designed, Chemically Powered Rotary Molecular Motor" T. Ross Kelly, Xiaolu Cai, Fehmi Damkaci, Sreeletha B. Panicker, Bin Tu, Simon M. Bushell, Ivan Cornella, Matthew J. Piggott, Richard Salives, Marta Cavero, Yajun Zhao, and Serge Jasmin J. Am. Chem. Soc. 2007, "129", 376-386. [http://pubs.acs.org/cgi-bin/abstract.cgi/jacsat/2007/129/i02/abs/ja066044a.html Abstract] ] .

Light-driven rotary molecular motors

In 1999, the laboratory of Prof. Dr. Ben L. Feringa at the University of Groningen (The Netherlands) reported the creation of a unidirectional molecular rotor ["Light-driven monodirectional molecular rotor" Nagatoshi Koumura, Robert W. J. Zijlstra, Richard A. van Delden, Nobuyuki Harada, Ben L. Feringa Nature 1999, "401", 152-155. [http://www.nature.com/nature/journal/v401/n6749/abs/401152a0_fs.html Abstract] ] . Their 360° molecular motor system consists of a bis-helicene connected by an alkene double bond displaying axial chirality and having two stereocenters.

One cycle of unidirectional rotation takes 4 reaction steps. The first step is a low temperature endothermic photoisomerization of the trans ("P","P") isomer 1 to the "cis" ("M","M") 2 where "P" stands for the right handed helix and "M" for the left handed helix. In this process, the two axial methyl groups are converted into two less sterically favorable equatorial methyl groups.

By increasing the temperature to 20 °C these methyl groups convert back exothermally to the ("P","P") "cis" axial groups (3) in a helix inversion. Because the axial isomer is more stable than the equatorial isomer, reverse rotation is blocked. A second photoisomerization converts ("P","P") cis 3 into ("M","M") trans 4, again with accompanying formation of sterically unfavorable equatorial methyl groups. A thermal isomerization process at 60 °C closes the 360° cycle back to the axial positions.

A major hurdle to overcome is the long reaction time for complete rotation in these systems, which does not compare to rotation speeds displayed by motor proteins in biological systems. In the fastest system to date, with a fluorene lower half, the half-life of the thermal helix inversion is 0.005 seconds ["Fine Tuning of the Rotary Motion by Structural Modification in Light-Driven Unidirectional Molecular Motors" Javier Vicario, Martin Walko, Auke Meetsma and Ben L. Feringa J. Am. Chem. Soc., 2006, "128", 5127-5135. [http://pubs.acs.org/cgi-bin/abstract.cgi/jacsat/2006/128/i15/abs/ja058303m.html Abstract] ] . This compound is synthesized using the Barton-Kellogg reaction. In this molecule, the slowest step in its rotation (the thermally induced helix-inversion) is believed to proceed much more quickly because the larger "tert"-butyl group makes the unstable isomer even less stable than when the methyl group is used. Said differently, the unstable isomer is more destabilized than the transition state that leads to helix-inversion. The different behaviour of the two molecules is illustrated by the fact that the half-life time for the compound with a methyl group instead of a "tert"-butyl group is 3.2 minutes. ["Controlling the speed of rotation in molecular motors. Dramatic acceleration of the rotary motion by structural modification" Javier Vicario, Auke Meetsma and Ben L. Feringa Chem. Commun., 2005, 5910-5912, DOI|10.1039/b507264f]

The Feringa principle has been incorporated into a prototype nanocar ["En Route to a Motorized Nanocar" Jean-François Morin, Yasuhiro Shirai, and James M. Tour Org. Lett.; 2006, "8", 1713-1716. [http://dx.doi.org/10.1021/ol060445d Graphical abstract] ] . The car thus far synthesized has an helicene-derived engine with an oligo (phenylene ethynylene) chassis and four carborane wheels and is expected to be able to move on a solid surface with scanning tunneling microscopy monitoring, although so far this has not been observed. Interestingly, the motor does not perform with fullerene wheels because they quench the photochemistry of the motor moiety.

References

See also

* Molecular motors
* Nanomotor


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Molecular motor — Molecular motors are biological molecular machines that are the essential agents of movement in living organisms. Generally speaking, a motor may be defined as a device that consumes energy in one form and converts it into motion or mechanical… …   Wikipedia

  • Molecular switch — A molecular switch is a molecule that can be reversibly shifted between two or more stable states.[1] The molecules may be shifted between the states in response to changes in e.g. pH, light, temperature, an electrical current, microenvironment,… …   Wikipedia

  • Molecular machine — Part of a series of articles on Molecular Nanotechnology …   Wikipedia

  • Nanotechnology — Part of a series of articles on …   Wikipedia

  • Nanomotor — A nanomotor is a molecular device capable of converting energy into movement. It can typically generate forces on the order of piconewtons. A proposed branch of research is the integration of molecular motor proteins found in living cells into… …   Wikipedia

  • Nanocar — For the automobile manufactured by Tata Motors, see Tata Nano. Chemical structure of a nanocar. The wheels are C60 fullerene molecules.[1] The nanocar is a molecule designed in 2005 at Rice University by a group headed by Professor James T …   Wikipedia

  • Outline of nanotechnology — The following outline is provided as an overview of and topical guide to nanotechnology: Nanotechnology – study of physical phenomena on the nanoscale, dealing with things measured in nanometres, billionths of a meter. Contents 1 Branches of… …   Wikipedia

  • David Leigh (scientist) — For the British journalist, see David Leigh. David Alan Leigh FRS is the Forbes Professor of Organic Chemistry at the University of Edinburgh. He is noted for the development of new methods to construct rotaxanes, catenanes and molecular knots… …   Wikipedia

  • Motor — may refer to: *Engine **Motor car or automobile **Motor vehicle **Motorcycle, a term used by police officers to refer to their official duty motorcycles *Motor system, the physiological system that is responsible for physical movement **Motor… …   Wikipedia

  • Nanodragster — Chemical structure of the nanodragster. The smaller wheels are p carborane with methyl groups and the larger wheels are C60 fullerene.[1] The Nanodragster, dubbed the world s smallest hot rod, is a molecular nanocar …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”